• RTP Pipes in Different Sizes: Applications, Selection and Performance Guide

    2026-06-15

    This article provides a structured comparison of RTP pipes by size category. Small diameter (≤6″) offers spoolable installation and high pressure (up to 32 MPa), with >25% lifecycle cost savings over steel. Medium diameter (6–12″) balances flow capacity and handling for midstream and industrial water. Large diameter (12–18″) reaches 457 mm with burst pressure up to 24.34 MPa, suitable for corrosive trunk lines, offshore risers, and hydrogen transmission. A selection matrix and best-practice recommendations are included to avoid undersizing or oversizing mistakes. Read More
  • Key Influencing Factors on the Performance and Lifetime of RTP Pipes

    2026-06-09

    Reinforced Thermoplastic Pipes (RTP) are increasingly replacing steel pipelines due to their corrosion resistance, flexibility, and high pressure capacity. To ensure their design life of over 20 years, it is essential to understand influencing factors such as materials, pressure, temperature, chemical compatibility, installation stresses, external damage, and joint quality. This paper provides a practical engineering analysis of each factor's mechanism and control measures, offering technical guidance for reliable RTP pipeline applications. Read More
  • What is RTP Pipe?

    2026-06-04

    Reinforced Thermoplastic Pipe (RTP) combines high pressure resistance (up to 32 MPa), excellent flexibility, and outstanding corrosion resistance, rapidly replacing traditional steel pipelines in oil & gas, hydrogen transportation, geothermal energy, mining, and chemical industries. With spoolable design for fast installation, lightweight structure for lower transport costs, and a service life exceeding 20 years in corrosive media, RTP pipes significantly reduce lifecycle costs. Kunshan Jimage Machinery Manufacturing Co., Ltd. provides complete RTP production lines and turnkey solutions. Read More
  • Non-Metallic Rope Winding RTP Pipe Production Line: Technology and Advantages

    2026-05-29

    Reinforced Thermoplastic Pipe (RTP) is replacing steel and pure plastic pipes. JMG Machinery's non-metallic rope winding line produces composite pipes (ID 50–150 mm) at 10 m/min using polyester or aramid reinforcement. This article covers equipment composition, working principle, key parameters, and advantages in oil/gas, water supply, and municipal applications. Read More
  • Glass Fiber Tape Winding Reinforced Composite Pipe Production Equipment

    2026-05-22

    The glass fiber tape winding reinforced composite pipe (RTP) production equipment is a high-precision continuous manufacturing line featuring multi-axis CNC control and constant tension winding technology. Pre-impregnated glass fiber tape is spirally wound around a thermoplastic inner pipe surface at controlled angles and tensions to form a multi‑layer cross‑wound network reinforcement structure, followed by an outer protective layer extrusion. The complete line consists of an inner pipe extruder, vacuum sizing tank, multi‑stage winding units (with infrared or hot air heating), outer pipe extruder and cladding die, cooling and haul‑off systems, and a fixed‑length cutting device. It accommodates pipe diameters from 50 to 600 mm and pressure ratings up to 30 MPa. This equipment is widely used in oil & gas transmission, municipal water supply, chemical corrosion protection, industrial slurry transport, and new energy pipelines, representing an advanced alternative to traditional metal and Read More
  • Comprehensive Technological Evolution of Composite Pipe Joint Equipment: A Review

    2026-05-18

    Composite pipes, particularly Reinforced Thermoplastic Pipes (RTP), offer outstanding corrosion resistance, light weight, and long service life. However, connection technology has long been a bottleneck limiting their large-scale application. This article systematically reviews the technological evolution of composite pipe joint equipment, highlighting fully automatic continuous feeding systems, precision temperature-controlled heating, enhanced stability and reliability, and a threefold efficiency gain compared to conventional methods. The paper also analyzes the global composite pipe market growth (CAGR exceeding 5%), explores application prospects in oil & gas, geothermal, and district heating, and outlines key international and regional standards (ASME, GOST, Chinese national standards). Fully automatic composite pipe joint equipment is emerging as a critical enabler for upgrading the composite pipe industry. Read More
  • Non-Metal Rope Winding RTP Pipe Production Equipment: The Next-Generation Solution for Flexible, High-Pressure Composite Pipeline Manufacturing

    2026-04-10

    This article provides a comprehensive technical overview of Non-Metal Rope Winding RTP Pipe Production Equipment, a state-of-the-art continuous manufacturing system designed for Reinforced Thermoplastic Pipes (RTP) . The equipment integrates a three-stage process: inner HDPE/PA/PVDF liner extrusion, an intermediate non-metallic fiber rope winding unit utilizing aramid and glass fibers for superior corrosion resistance and pressure containment (up to 32 MPa), and an outer protective coating application. By replacing steel reinforcement with non-metal rope winding technology, the system produces lightweight, spoolable composite pipes ideal for high-pressure oil and gas gathering, hydrogen transportation, and industrial fluid transfer. The article details the operational advantages of this one-step production line, including reduced lifecycle costs, enhanced installation efficiency, and compliance with global energy transition demands. Key features discussed include precision tension cont Read More
  • Advanced Steel Wire Reinforced Composite Pipe Production Equipment: Enhancing Structural Integrity and High-Pressure Performance

    2026-03-23

    This article introduces steel wire reinforced composite pipe production equipment, a specialized manufacturing system that integrates thermoplastic extrusion with high-tensile steel wire winding to produce high-pressure, durable composite pipes. It covers the key components of the production line—including extruders, steel wire winding units, bonding stations, and automated cutting systems—and highlights advantages such as continuous winding, PLC-controlled synchronization, and modular design. The article also outlines technical specifications, application scenarios, sustainability features, and emerging industry trends, aiming to provide a comprehensive overview for manufacturers and engineering professionals seeking efficient, scalable solutions for reinforced thermoplastic pipe (RTP) production. Read More
  • 4-10 Inch RTP Pipe Production: Advanced Manufacturing for High-Pressure Oil & Gas Applications

    2026-03-16

    This article explores the production and advantages of 4-10 inch Reinforced Thermoplastic Pipe (RTP) for high-pressure oil and gas applications.Market Growth: RTP demand is rising as a corrosion-resistant, cost-effective alternative to steel, with the 4-10 inch range critical for onshore flow lines and gas gathering. Manufacturing: Uses a continuous one-step process—extruding a HDPE/PA/PVDF liner, applying multi-layer reinforcement (aramid/glass fibers) under constant tension control, and encapsulating with an outer sheath. Materials: Liner selection depends on application—PE100 for standard, PA12 for hydrocarbons, PVDF for sour service (H₂S/CO₂) up to 120°C. Advantages: Offers 25–50% lower lifecycle costs than steel, immunity to corrosion, spoolable transport (continuous km-long lengths), and rapid installation. Emerging Uses: Suitable for hydrogen transport, CCUS, and geothermal fluids, meeting API 15S and ISO 18226 standards. Read More
  • Total 4 pages  Go to Page
  • Go

In past 4 years ,31 RTP production line was intsalled and processing in China. 15 lines for tap (metal and nonmetal) winding pipe line and 16 lines for rope (metal and nonmetal) widing pipe line.

Quick Links

Contact Us

Copyright© 2023 Kunshan JMG Machinery Manufacturing Co.,Ltd. Technology by Leadong. Sitemap.